Feeding In The Bypass Mode; Placing Cards - Canon imageFORMULA DR-2010M User Manual

Feeding in the Bypass Mode

When scanning multiple page documents that are fastened together, such as
invoices, place the documents so that the edge that is fastened together is
facing down.
Switch the feed selection lever to (Bypass).
Adjust the document guides to fit the width of the document to be scanned
(See p.24).
Place the document with the reverse side facing you, and the top of the
document facing down (See p.24).
26
Back
Contents
Use the application software to start scanning.
IMPORTANT
After you finish scanning, close the document feed tray and the document eject
tray to prevent damage to the scanner while it is not being used.

Placing Cards

Switch the feed selection lever to (Bypass).
CAUTION
•
When scanning cards, make sure to set the feed selection lever
to (Bypass).
•
The maximum number of cards that can be scanned at a time is three.
Adjust the document guides to fit the width of the card to be scanned (See
p.24).
Previous Page Next Page