Quitting Captureontouch; Restarting Captureontouch; Scanner Settings - Canon imageFORMULA DR-2010M User Manual

Quitting CaptureOnTouch

Click (CaptureOnTouch) on the taskbar (menu bar in Mac OS X), and click [Exit]
in the menu.
The application no longer resides on the system, and the taskbar (menu bar in Mac
OS X) icon disappears.
NOTE
If you end CaptureOnTouch on Mac OS X, scanning cannot be started by pressing a
job button (See p.46). In such a case, start CaptureOnTouch again.

Restarting CaptureOnTouch

Press any job button on the scanner to restart CaptureOnTouch. CaptureOnTouch
starts and the main screen appears.
NOTE
•
CaptureOnTouch resides on the system when it starts, and the CaptureOnTouch
icon appears on the taskbar (menu bar).
•
In Windows, you can also restart from the Windows Start menu. Click [Start],
point to [Programs] (or [All Programs]), point to [Canon DR-2510C] (or [Canon
DR-2010C]), and then click [CaptureOnTouch].
37
Back
Contents

3. Scanner Settings

Configure various scan settings such as the scanning method and document size
(collectively referred to as "scanner settings").
[Scan First] and [Select Scan Job] share the same scanner setting items.
For [Scan First]
When using [Scan First], you configure scanner settings before scanning begins.
Previous Page Next Page