Feeding In The Bypass Mode; Placing Cards - Canon IMAGE FORMULA DR-2010C User Manual

Feeding in the Bypass Mode

When scanning multiple page documents that are fastened together, such as
invoices, place the documents so that the edge that is fastened together is
facing down.
1
Switch the feed selection lever to (Bypass).
2
Adjust the document guides to fit the width of the document to be scanned
(See p.21).
3
Place the document with the reverse side facing you, and the top of the
document facing down (See p.21).
23
Back
Contents
IMPORTANT
After you finish scanning, close the document feed tray and the document eject
tray to prevent damage to the scanner while it is not being used.

Placing Cards

1
Switch the feed selection lever to (Bypass).
CAUTION
When scanning cards, make sure to set the feed selection lever to (Bypass),
and scan the cards one at a time.
2
Adjust the document guides to fit the width of the card to be scanned (See
p.21).
Previous Page Next Page
DR-2010C / DR-2510C DR-2010C / DR-2510C