Canon imageFORMULA DR-2010M User Manual page 104

Grasp the ends of the roller cover inside the front unit and pull it down to
open it.
Lift up the roller fixing lever ( ), and slide it to the right ( ).
Remove the retard roller by moving it to the right to detach it from its shaft,
and pull it out.
104
Back
Contents
Attaching the Retard Roller
Insert the retard roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the front unit.
Slide the roller fixing lever to the left to lock the roller into the hole on the
left of the retard roller.
Push down the lever to lock the shaft of the feeding roller into place.
Previous Page Next Page