Scanning Methods - Canon imageFORMULA DR-2010M User Manual

NOTE
•
When scanning folded documents, switch the feed selection lever
to (Bypass).
•
When placing folded documents, place the document into the scanner so that
the fold is on the right side. The side of the folded document facing you will
become the right side of the combined image.
•
When scanning a folded document, set [Scanning Side] on the scanner driver
settings screen to [Folio]. (See "Scanning Side Settings" on page 69.)
•
The maximum size for the combined image is A3. When scanning a folded
document of a size other than the standard formats, set [Page Size] on the
scanner driver settings screen to [Auto-detection]. (See "Paper Size Settings"
on page 67.)
28
Back
Contents

4. Scanning Methods

The product comes with the following software applications. These applications
have to be installed from the supplied Setup disc.
•
CaptureOnTouch
This is a scanning software application that makes it easy to perform scanning
simply by following the on-screen guidance. Assigning scan functions to the
job buttons of the unit is also done with this software.
For details on CaptureOnTouch, refer to "Chapter 4 CaptureOnTouch Settings".
Previous Page Next Page