Canon imageFORMULA DR-2010M User Manual page 102

Open the roller cover on the main unit by placing your fingers in the
grooves and pulling it down.
Lift up the roller fixing lever ( ), and slide it to the left ( ).
Remove the feeding roller by moving it to the left to detach it from its shaft,
and pull it out of the slot.
102
Back
Contents
Attaching the Feeding Roller
Insert the feeding roller into the slot inside the roller cover, and align the
notch on the roller with the shaft on the main unit.
Slide the roller fixing lever to the right to lock the roller into the hole on the
left of the feeding roller.
Push down the lever to lock the shaft of the feeding roller into place.
Previous Page Next Page