Table of Contents
Advertisement
Quick Links
Solar Inverter
PVS-10/12.5/15-TL
Quick Installation Guide
In addition to what is explained in this quick installation guide, the safety
and installation information provided in the product manual must be read
and followed. The technical documentation for the product is available at
APPLY HERE
the website.
The device must be used in the manner described in the manual. If this
THE COMMUNICATION
is not the case the safety devices guaranteed by the inverter might be
ineffective.
IDENTIFICATION LABEL
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fimer PVS-10-TL
Summary of Contents for Fimer PVS-10-TL
- Page 1 Solar Inverter PVS-10/12.5/15-TL Quick Installation Guide In addition to what is explained in this quick installation guide, the safety and installation information provided in the product manual must be read and followed. The technical documentation for the product is available at APPLY HERE the website.
- Page 2 This Quick Installation Guide is related to the following inverter models: Inverter model Input MPPTs DC switch DC SPD DC connection AC SPD AC connection PVS-10-TL-SX PVS-12.5-TL-SX Type 2 4 input strings Type 2 AC quick fit connector PVS-15-TL-SX PVS-10-TL-SY PVS-12.5-TL-SY...
- Page 3 Manufacturer XX minutes If you notice defects or deterioration, stop the operations and call the WLAN (Wi-Fi) and ETH1/ETH2 carrier, as well as inform FIMER Service immediately. PN: PPPPPPPPPPP WO:XXXXXXXXXXXX (Ethernet) MAC addresses Please keep the packaging in the event it has to be returned; the use of Product Key.
- Page 4 Component Q.ty • Provide a sufficient working space in front of the inverter that allows to removing the front cover (FIMER service only) and to allow wiring connections. Vertical mounting bracket (05) • Install at a height which takes into consideration the weight of the unit and in a position which is suitable for servicing, unless suitable means will be provided to carry out these mentioned operations.
- Page 5 Load protection breaker PVS-10-TL PVS-12.5-TL PVS-15-TL inverter. Check that the Automatic circuit breaker with thermal- anchor points has been...
- Page 6 MPPT). For each MPPT 2 pairs of quick fit connectors are available. not connect to the grid and it will provide an error state. Respect the Maximum DC input power for each MPPT as follow: MPPT PVS-10-TL PVS-12.5-TL PVS-15-TL • Re-install the screw terminal block inside the AC quick fit connector.
- Page 7 • Open the " Installer for solar inverters" APP. remains fully functional, you are advised to check for any firmware updates in the download area of the website www.fimer.com or at • Login or Sign-In to Aurora vision account. https://registration.solar.fimer.com (instructions for registering on the website and updating the firmware are given in the product manual).
- Page 8 6. In the event of a fault, limited by the external protection envisaged on the AC circuit. 4. Hereby, FIMER S.p.A. declares that the radio equipments (radio module combined with Features not specifically mentioned in this data sheet are not included in the product.
Need help?
Do you have a question about the PVS-10-TL and is the answer not in the manual?
Questions and answers