Page 1
Solar Inverter PVS-50-TL & PVS-60-TL Quick Installation Guide In addition to what is explained in this quick installation guide, the safety and installation information provided in the product manual must be read and followed. The technical documentation for the product is available at APPLY HERE the website.
1. Labels and Symbols 2. Installation site and position The labels on the inverter show the conformity marking, main technical • Consult technical data to confirm the environmental specifications will data and identification of the equipment and manufacturer. be met. The below labels are intended as an example only;...
Page 3
PVS-60 PVS-50/60-TL INPUT OUTPUT AC PVS-50/60-TL-SX / PVS-50/60-TL-SX2 INPUT INPUT OUTPUT AC PVS-50-TL-SX PVS-50-TL-SX2 PVS-50-TL PVS-60-TL-SX PVS-60-TL-SX2 PVS-60-TL READ THE MANUAL – See the manual for details on the connections and functions available on the communication and control board. The illustration shows the main components and connections available on the communication and control board (30). Each connection cable reaches...
Lifting type of support (wall, frame or other support), the type of anchors to FIMER usually stores and protects individual components by suitable be used and their ability to support 4 times the inverter’s weight (4 means to make their transport and subsequent handling easier, but as a x 70 kg=280 kg for all models).
Page 5
(10.0 Nm torque) the cable gland firmly and check protection (if required) seal. Differential sensitivity (if 500mA for PVS-50-TL and 600mA for PVS- required) 60-TL Characteristics and Sizing of the Line Cable The AC connection is three-phase (three-wire connection 3W+PE or four wire connection 4W+PE, grounded only WYE system).
Page 6
Commisioning via “Installer for solar inverters” mobile app “Installer for Solar Inverters” is the new advanced FIMER mobile APP allows to simplify commissioning, parameter settings and troubleshooting of FIMER string multi-inverters in large scale solar plants.
Page 7
For more details about commissioning and any other functionalities of the Installer for Solar Inverters mobile APP please contact FIMER customer support. For any other specific settings of parameters of single inverters please refer to “Description of the Web User Interface”...
Page 8
With regard to purchase orders, the agreed particulars reproduction, disclosure to third parties or utilization of representative or visit: shall prevail. FIMER does not accept any responsibility its contents – in whole or in parts – is forbidden without whatsoever for potential errors or possible lack of prior written consent of FIMER.