Table of Contents
Advertisement
Quick Links
Solar Inverter
PVS-60-TL-US
Quick Installation Guide
In addition to what is explained in this quick installation guide, the safety and installation information provided in the product manual must be read and
followed. The technical documentation for the product is available at the website.
The device must be used in the manner described in the manual. If this is not the case the safety devices guaranteed by the inverter might be
ineffective.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fimer PVS-60-TL-US
Summary of Contents for Fimer PVS-60-TL-US
- Page 1 Solar Inverter PVS-60-TL-US Quick Installation Guide In addition to what is explained in this quick installation guide, the safety and installation information provided in the product manual must be read and followed. The technical documentation for the product is available at the website.
-
Page 2: Labels And Symbols
(FIG. 03). located at www.fimer.com. • In case of multiple installation position the inverters side by side keeping... - Page 3 3. Inverter models and components The inverter model should be chosen by a specialized technician who has a good knowledge of the installation conditions, the devices that will be installed externally, and whether it will eventually be integrated into an existing system. The following models of inverter are available: Inverter model Input channel DC connection...
-
Page 4: Lifting And Transporting
4.2 Lifting ATTENTION – The warranty is void if the inverter isn’t connected to FIMER usually stores and protects individual components by suitable ground through the appropriate terminals. means to make their transport and subsequent handling easier, but as a rule, it is necessary to utilize the experience of specialized staff in change Follow site wiring diagrams and grounding plans. -
Page 5: Mounting Instructions
3. install the conduit on the AC opening (18) • Remove the plugs on the DC openings (17) and install the conduits on it (PVS-60-TL-US-S model). 8.2 Grid output connection (AC side) The medium voltage trasformer, i.e. the grid (distribution system), must... - Page 6 These inverter versions have three input channels which work counterpart. Refer to the document “String inverter – Product Manual appendix” available at www.fimer.com to know the brand and the independently of one another, which can be paralleled by leveraging a single MPPT.
- Page 7 - STEP 4 - Set the inverter grid standard and configure the input channels. By clicking “FINISH” the wizard completes the configuration procedure “Installer for Solar Inverters” is the advanced FIMER mobile APP allows to (after the settings are confirmed, the inverter restarts).
- Page 8 With regard to purchase orders, the agreed particulars reproduction, disclosure to third parties or utilization of representative or visit: shall prevail. FIMER does not accept any responsibility its contents – in whole or in parts – is forbidden without whatsoever for potential errors or possible lack of prior written consent of FIMER.
Need help?
Do you have a question about the PVS-60-TL-US and is the answer not in the manual?
Questions and answers