Intended Use; Scope Of Delivery - Parkside PWDS 920 B2 Operation And Safety Notes

Drywall sander
Table of Contents

Advertisement

Available languages

Available languages

˜ Intended use
This drywall sander (hereinafter "product" or
"power tool") is suitable for the following tasks:
Surface preparation before painting/
 
wallpapering:
Sanding primed or plastered drywall
Sanding wooden (natural timber or
plywood) wall and ceiling
Removing unwanted waste materials:
 
Carpet residue
Paint coatings
Coverings/adhesives
Loose plaster
Do not use the product for the following tasks:
Removing wallpaper
 
Cutting or sanding metal
 
Roughing or polishing works
 
Sanding materials containing asbestos
 
Do not use the product in a wet environment .
Do not use the product together with wire brushes
or similar type of accessories .
Always use the correct type of sanding paper
according to the intended use . Observe
the technical requirements of this product
(see "Technical data" and "Selecting sanding
paper") when purchasing and using sanding
paper .
The LED work light on this product is intended to
illuminate the immediate work area .
Any other use or modification of the product
are considered improper use and can result in
hazards such as death, life-threatening injuries
and damage . The manufacturer is not liable
for any damages caused by improper use . The
product is exclusively intended for domestic use .
The product is not intended for commercial use,
industrial operations or similar purposes .
Observe all applicable local safety regulations,
standards and ordinances . The use of noise
emitting power tools may be restricted to certain
times by national or local regulations .
˜ Scope of delivery
m
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
1x Drywall sander PWDS 920 B2
1x Telescopic extension shaft
1x Vacuum hose
2x Vacuum hose adaptor
(1 adaptor is pre-installed on the vacuum
hose)
6x Sanding paper
(Grit size: #80, #100, #120, #150, #180,
#240)
1x Screwdriver
1x Hex key
2x Spare carbon brush (1 pair)
1x Instruction manual
GB/IE/NI
7

Advertisement

Table of Contents
loading

Table of Contents