Related Manuals for Milestone ML 401 VIDEO
Summary of Contents for Milestone ML 401 VIDEO
- Page 1 VIDEO SWITCHER’S MANUAL Phone: 91-79-55310266 / 55124898 (M) 0-98253-50221 www.interfaceproducts.info...
- Page 2 Milestone’s “ VIDEO” Switcher is a device that helps person/s to share multiple Video source with single / multiple projector. Models Available : ML 401 VIDEO 4 VIDEO input > 1 VIDEO out ML 402 VIDEO 4 VIDEO input > 2 VIDEO out ML 802 VIDEO 8 VIDEO input >...
- Page 3 Technical Specifications ML401 Video ML402 Video ML802 Video ML1602 Video Models VIDEO I/P (RCA) VIDEO O/P (RCA) Selected input indication Power indication Key Pad Selection 1 to 4 1 to 4 1 to 8 1 to 16 D9M x 1 D9M x 1 D9M x 1 D9M x 2...
- Page 4 The connecter diagram for D9 male connector is as follows: D-9 Male Channels Note : to select channel 1, short 1 and 9 through contact switch or use Milestone’s remote keypad / RF remote controller / IR remote controller. Remote RS232 Interface D9 female connector from rear panel is used for selecting the switcher through RS232 interface.
- Page 5 The pin configurations are: D-9 Male Channels The simple command used for selecting the channels is Input Channel Decimal ASCII Channel 1 31, 21 Channel 2 32, 21 Channel 8 38, 21 Communication parameters are 9600 baud, 8-bit, 1 stop bit and no parity. B.
Need help?
Do you have a question about the ML 401 VIDEO and is the answer not in the manual?
Questions and answers