RGBHV SWITCHER RGBHV SWITCHER by Milestone is a device that helps person/s to share computers (or laptops) with single projector and single monitor, providing simultaneous displays. Also it can be used as component video or composite video switcher. Models available...
Page 4
Select the required channel from the front panel keypad. Remote contact closure/ remote keypad Rear panel has a D9 male connector, operational at a distance of 50 meters. Milestone’s remote keypad or any other remote contact closure can be connected at this connector.
Page 5
D-9 FEMALE SIGNAL The simple commands used for selecting the channels are CHANNEL DECIMAL ASCI I CHANNEL1 31, 21 CHANNEL 2 32, 21 CHANNEL 9 39, 21 CHANNEL10 61,21 CHANNEL11 62,21 CHANNEL16 67,21 Communication parameters are 9600 baud, no parity, 8-bit and 1 stop bit.
Page 6
Short all the pins of D9 pin connector (using another D9 Female Connector i.e.1 to 9 pins) at the rear panel. In this mode scanning of all PCs is done regardless of the PCs are ON or OFF. C. AUTO MODE For Auto mode, keep slide-switch in Auto position.
Need help?
Do you have a question about the ML 402 RGBHV and is the answer not in the manual?
Questions and answers