Advertisement
Step 2: Click the
Step 3: Check your DAQ Card is or not on supported list, then click the
"Next>"
Step 4: Select the installed folder, the default path is C:\ICPDAS\UniDAQ ,
confirm and click the
Step 5: Check your DAQ Card on list, then click the
Step 6: Click the
Step 7: Click the
Step 8: Select
"Finish"
For detailed information about the driver installation, please refer
to Chapter 4 "Software Installation" of the user manual.
Installing Hardware on PC
Step 1: Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI/PCI Express slot.
Step 4: Carefully insert your I/O card into the PCI/PCI Express slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
PIO-D24U/D56U, PEX-D24/D56 Quick Start Guide
2
WebSite: http:// www.icpdas.com.tw
"Next>"
button to start the installation.
button.
"Next>"
"Next>"
button on the
"Next>"
button on the
"No, I will restart my computer later"
button.
E-Mail: service@icpdas.com , service.icpdas@gmail.com
button.
"Next>"
Select Additional Tasks
Download Information
and then click the
button.
window.
window.
ICP DAS CO., LTD.
Advertisement
