3400 & 3409
Wall Mounted, Telescopic Screen
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377,
e-mail: customerservice@wincomfg.com before attempting to use this product; otherwise injury may occur.
Winco assumes no responsibility for damage or injury caused by the
improper assembly, installation or use of these products.
1. READ AND FOLLOW ALL DIRECTIONS. 2. NEVER hang equipment or personal objects from Curtain Rod;
Screen could fall and INJURY MAY OCCUR.
NEVER place screen near open flame or over a radiator or heat register.
3.
NEVER place screen in front of a door or exit sign; In case of emergency screen could block or hinder
4.
evacuation.
SUFFOCATION DANGER to children; Screen could block nose and mouth and prevent breathing.
5.
VINYL SCREEN IS NOT A TOY.
DO NOT allow children to play with, or climb on screen; Screen could fall and SERIOUS INJURY MAY
6.
OCCUR.
Periodically, recheck tightness of mounting screws.
7.
ALWAYS mount at least two mounting screws to a wall stud, "dead wood" or other solid wall structure;
8.
DO NOT attach to drywall; Professional installation is recommended.
DO NOT use screen in or with ANY type of vehicle or trailer.
9.
Immediately remove from service; Any screen with broken or missing parts, torn vinyl, or other visible
10.
damage.
USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
11.
SAVE THESE INSTRUCTIONS for future reference and training.
12.
Tools needed:
•
Phillips-Head Screwdriver
•
Scissors or box cutter
•
Special tools for mounting to concrete wall (ex. Drill, masonary bit, etc...) it is recommended that someone with
experience using these types of tools perform this type of installation.
•
- If using powered tools always wear safety goggles –
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY
MOUNTING BRACKET TO WALL
1. You must first choose a sturdy, unobstructed (clear of ceiling, fans, electrical wiring, etc...) mounting location
approximately 80" from floor to top of Mounting Bracket.
IMPORTANT: Mounting to drywall only is NOT recommended.
2. If mounting to a wall with a solid wood backer-board; Use all four (4) Phillips screws provided; DO NOT
OVERTIGHTEN.
006245
CUSTOMER INSTRUCTIONS
Rev K Date 06-26-13
Page 1 of 4
JWC