AXEL ULite Hardware Manual
3.7
Power consumption
This section will be completed in a future version of this manual.
3.8
CPU module connectors
All interface signals AXEL ULite provides are routed through SODIMM
DDR3 204 pin (named J2). The dedicated carrier board must mount the
mating connector and connect the desired peripheral interfaces
according to AXEL ULite pinout specifications.
For mechanical information, please refer to Section 4 (Mechanical
specifications). For pinout and peripherals information, please refer to
Sections 5 (Pinout table) and 6 (Peripheral interfaces).
v.1.0.2
August, 2019
23/65