Electromagnetic Compatibility - National Instruments SCC-TC Series User Manual

Environmental
Safety
Note For UL and other safety certifications, refer to the product label, or visit
ni.com/hardref.nsf
appropriate link in the Certification column.

Electromagnetic Compatibility

For full EMC compliance, operate this device with shielded cabling. In addition,
Note
all covers and filler panels must be installed.
CE Compliance
SCC-TC Series Thermocouple Input Modules User Guide
Operating temperature ............................0 to 50 °C
Storage temperature ................................–20 to 70 °C
Humidity .................................................10 to 90% RH, noncondensing
Maximum altitude...................................2,000 m
Pollution Degree (indoor use only) ........2
The SCC-TC0X meets the requirements of the following standards
for safety and electrical equipment for measurement, control, and
laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3111-1, UL 61010B-1
• CAN/CSA C22.2 No. 1010.1
, search by model number or product line, and click the
Emissions................................................EN 55011 Class A at 10 m
Immunity ................................................EN 61326:1997 + A2:2001,
CE, C-Tick, and FCC Part 15 (Class A) Compliant
The SCC-TC0X meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
FCC Part 15A above 1 GHz
Table 1
14 ni.com