Electromagnetic Compatibility - National Instruments SCC-AO10 User Manual

Safety
For UL and other safety certifications, refer to the product label, or visit
Note
ni.com/hardref.nsf
appropriate link in the Certification column.

Electromagnetic Compatibility

Note For EMC compliance, operate this device with shielded cabling.
CE Compliance
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
ni.com/hardref.nsf
appropriate link in the Certification column.
SCC-AO10 Isolated Analog Output Module User Guide
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3111-1, UL 61010B-1
• CAN/CSA C22.2 No. 1010.1
, search by model number or product line, and click the
Emissions................................................EN 55011 Class A at 10 m
Immunity ................................................EN 61326:1997 + A2:2001,
CE, C-Tick, and FCC Part 15 (Class A) Compliant
This product meets the essential requirements of applicable European
directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety)..............73/23/EEC
Electromagnetic Compatibility
Directive (EMC) .....................................89/336/EEC
, search by model number or product line, and click the
FCC Part 15A above 1 GHz
Table 1
10 ni.com