Rexing V1 Basic Quick Start Manual page 8

To playback a video on
the device,
toggle to the
Playback mode. Use the REC
and MIC buttons to toggle to
the desired video. Press the
OK button to play.
During playback use the OK (pause), MIC (fast forward) and REC
(rewind) buttons to control the video playback.
To playback a video on the computer either use an SD card
adapter or connect the device to the computer directly using
the USB to Mini B 5pin male cable.
14
To playback a video using
an SD card adapter,
remove the memory card and
insert it into an SD
adapter. Place the adapter in
the computer.
To playback a video
using USB to Mini B
5pin male cable,
the USB to Mini B 5pin Male
Cable to the device and
the USB connector to the
computer.
After the device powers
up, press the OK Button to
select Mass Storage.
On the computer, navigate
to device drive. The videos
are stored
MOVIE.
Select the video to playback.
card
Parking Monitor
You can enable the parking monitor function through the
setup option.
connect
at: \CARDV\
Connect USB
connector to
computer
Select Mass
Storage
15