Rexing V1 Basic Quick Start Manual page 5

Press the Power
button to turn
the power off
Step 3: Power the Camera and Format the
Memory Card
Power the camera by connecting the charger to the car cigarette
lighter and camera.
To ensure the V1 Basic records to your memory card
properly and without error. Before you start using a new
memory card, you must format the card within the
camera using the format
important data stored on the memory card before formatting.
To format the memory card, make sure you have inserted
your memory card, then turn on the device by connecting to
a power source. Press REC to stop recording. Then press the
MENU button twice to enter the System Setup Menu. Use the
REC and MIC buttons and go to the Format setting. Press the
OK Button to con irm the selection.
8
function.
Always backup
You may now disconnect from power. The camera will shut
down after 3 seconds. The camera should begin recording
automaticially the next time it is powered on.
Press the Menu
button twice
Press the OK
button to confirm
formatting
the card
9