Preparing For Maintenance - Toro Reccycler Manual

personal injury. Run the engine dry or remove the
fuel with a hand pump; never siphon the fuel.
•
To ensure optimum performance of the machine,
use only genuine Toro replacement parts and
accessories. Replacement parts and accessories
made by other manufacturers could be dangerous,
and such use could void the product warranty.

Preparing for Maintenance

1. Shut off the engine, remove the electric-start
button (if equipped), and wait for all moving
parts to stop.
2. Disconnect the spark-plug wire from the spark
plug (Figure 25).
1. Spark-plug wire
3. After performing the maintenance procedure(s),
connect the spark-plug wire to the spark plug.
Important:
Before tipping the machine to
change the oil or replace the blade, allow the
fuel tank to run dry through normal usage. If
you must tip the machine prior to running
out of fuel, use a hand fuel pump to remove
the fuel. Always tip the machine onto its
side, with the dipstick down.
Figure 25
g033513
19