Setup; Assembling And Unfolding The Handle - Toro Reccycler Manual

Setup

Important:
Remove and discard the protective plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
Important:
To prevent accidental starting, do not insert the electric-start button into the electric-start
ignition (if equipped) until you are ready to start the engine.
1

Assembling and Unfolding the Handle

No Parts Required
Procedure
Note:
Ensure that the cables are routed on the outside of the handle and are not pinched (D of Figure 3).
g236451
Figure 3
5