Removing The Machine From Storage - Toro Reccycler Manual

Removing the Machine
from Storage
1. Electric-start models only: Charge the battery
for 24 hours; refer to
21).
2. Check and tighten all fasteners.
3. Remove the spark plug and spin the engine
rapidly by pulling the recoil-start handle to blow
the excess oil from the cylinder.
4. Install the spark plug and tighten it with a torque
wrench to 20 N∙m (15 ft-lb).
5. Perform any maintenance procedures; refer to
Maintenance (page
6. Check the engine-oil level; refer to
Engine-Oil Level (page
7. Fill the fuel tank with fresh fuel; refer to
the Fuel Tank (page
8. Connect the wire to the spark plug.
Charging the Battery (page
18).
Checking the
10).
Filling
10).
25