Technical Specifications; Getting To Know Your Appliance - Champion CHNB500 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

25.
If the appliance overheats, a thermal switch will become activated and shut off the motor. To
reset, unplug the appliance and let it cool down for approximately 30 minutes before using
again.
26.
This product is intended for household use only. Do not use this appliance for anything other
than its intended use. Do not use outdoors.
27.
Appliance accessories are not intended to be used in the microwave. Do not place the jar or
the lid in the microwave as it may result in damage to the accessories.
28.
Check the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
29.
Never immerse the motor unit in water or any other liquid, not rinse it under the tap. Use only
a moist cloth to clean the motor unit.
30.
Unplug the appliance immediately after use.
31.
Keep the appliance out of the reach of children.
32.
Always unplug the appliance before you start cleaning the appliance.
33.
To avoid occurring danger, please assemble product correctly.
34.
Make sure the blade is securely fastened to the accessories before you assemble them onto
the motor unit.
35.
Do not attempt to repair or disassemble the appliance.
36.
WARNING: Extension cords are not recommended for use with this product.
37.
Save these instructions for future use.

TECHNICAL SPECIFICATIONS

Voltage:
220~240V 50/60Hz
Power:
1200W
Jar Capacity:
0.5L, 0.7L, 1.0L

GETTING TO KNOW YOUR APPLIANCE

A.
Seal Lid
B.
Sip & Seal Lid
C.
1.0L Jar
D.
0.7L Jar
E.
0.5L Jar
F.
Motor Base
G.
Blade Assembly
C
A
D
B
E
EN
G
F
2

Advertisement

Table of Contents
loading

Table of Contents