Grain Direction - Logiquip DRI-STOR User Manual

USER GUIDE
ENDOSCOPE DRYING CABINETS HEPA FILTER
SOLVENT CLEANING
Organic solvents can be used to remove materials that have not had time to oxidize or decompose. Solvents should
not contain chloride, such as acetone, methyl alcohol, or mineral spirits. There are many blended organic cleaners
that are commercially available. Users are advised to contact suppliers of solvents for information regarding
application on stainless steel.
HOUSEHOLD CLEANERS
Household cleaners fall into two categories; detergent (non-abrasive) and abrasive cleaners. Both are effective for
many mild dirt, stain, and soil deposits, as well as light oils, such as fingerprints. The abrasive cleaners are more
effective, but introduce the possibility of scratching the surface. The degree of abrasiveness will vary greatly with
the product. Some brands will produce noticeable scratching on only the most highly-polished surfaces. All of these
cleaners vary widely with respect to acidity and the amount of chlorine contained. A neutral cleaner which is low in
chloride is preferred, unless the user is assured that the surface can be thoroughly rinsed after cleaning with warm
water and wiped dry with a soft cloth. It is not a guarantee that the product is non-abrasive, non-acidic, or low in
chloride even if it states that it is for use on stainless steel. The cleaning method generally employed with these
cleaners is to apply to the stainless surface and follow directions closely.
Even the finest cleaning powders can scratch or burnish a finish. On polished finishes, rubbing or wiping should be
done in the direction, NOT across, of the polish line or grain of the surface.

GRAIN DIRECTION

FOR BEST PRACTICES WIPE SIDE TO SIDE
www.logiquip.com
| 7