Best Practices; Preventative Maintenance Schedule - Logiquip DRI-STOR User Manual

BEST PRACTICES

• Take care in hanging and removing a scope to minimize the risk of damage
• Do not store a scope with the end touching the drip tray
• Ensure the drip tray is cleaned on a regular basis
FILTRATION
The Cabinet HEPA Filter consists of three levels of Filtration:
1. If equipped with a side mount component cabinet, an External Filter
2. HEPA Filter and Pre-Filter
3. A VOC Carbon Filter inside the cabin HEPA Filter is designed to filter odors
If the Pre-Filter is maintained on a regular schedule, it will ensure that the HEPA Filter will provide years of service
without requiring exchange.
The HEPA Filtration for the Endoscope Channel Air Purge is a separate HEPA Filter.

PREVENTATIVE MAINTENANCE SCHEDULE

Cabinet Positive Pressure Filter For HEPA-Only Cabinets Replacement Kit
• Includes two (2) HEPA Pre-Filters, two (2) HEPA Post-Filters, two (2) O-Rings,
and two (2) 40000EF (External Filters)
• Replacement every six (6) months is recommended
Cabinet Main HEPA Filter
(40000MFF)
• Includes one (1) main HEPA Filter replacement
• Replacement every two (2) years is recommended
Channel Air Purge HEPA Filter Replacement Kits
• Filter Kit for 1 Pump Cabinets with 10 Scopes or less
Includes two (2) HEPA Pre-Filters, two (2) HEPA Post-Filters, two (2) O-Rings,
two (2) 40000EF (External Filters), and two (2) 40000CPHF (Channel Purge Filters)
• Filter Kit for 2 Pump Cabinets with 10 Scopes or less
Includes two (2) HEPA Pre-Filters, two (2) HEPA Post-Filters, two (2) O-Rings,
two (2) 40000EF (External Filters), and four (4) 40000CPHF (Channel Purge Filters)
• Replacement every six (6) months is recommended for both Kits
Tubes should be wiped clean between scope exchange, and disinfected weekly, or at the hospital's discretion.
www.logiquip.com
ENDOSCOPE DRYING CABINETS HEPA FILTER
(2 options)
(40000HEPAKIT)
(40000CPKIT-1)
(40000CPKIT-2)
USER GUIDE
| 5