Logiquip DRI-STOR User Manual
Hide thumbs
Also See for DRI-STOR:
- Use & care manual (27 pages) ,
- Installation & user manual (39 pages)
Related Manuals for Logiquip DRI-STOR
Summary of Contents for Logiquip DRI-STOR
- Page 1 USER GUIDE DRI-STOR USER GUIDE Read and understand all of the instructions in CAUTION this document before using your product. (800) 665-3760 www.logiquip.com customersupport@logiquip.net...
- Page 2 USER GUIDE ENDOSCOPE DRYING CABINETS HEPA FILTER SUMMARY LogiQuip’s Dri-Stor HEPA Filter Endoscope Storage Cabinets are designed to: • Ensure a clean storage location for disinfected Endoscopes • Provide a clean supply of HEPA Filtered air ventilating the Endoscopes in storage •...
-
Page 3: Electrical Supply
20 minutes prior to connecting to an Endoscope • Tubing sets and connectors should be checked regularly for cracks and loss of tubing flexibility. If any such flaws are found, they should be replaced immediately Based on independent third-party testing. www.logiquip.com... -
Page 4: Operation
ENDOSCOPE DRYING CABINETS HEPA FILTER OPERATION • For instructions for using Dri-Stor EndoTrack, the touchscreen featuring controlled user access and indicator of scope cleanliness life-cycle, please refer to the separate dedicated Dri-Stor EndoTrack User Guide • The system consists of an enclosed cabinet that provides a clean source of HEPA Filtered air to ensure a maintained environment for the Endoscope storage •... -
Page 5: Best Practices
(2) 40000EF (External Filters), and four (4) 40000CPHF (Channel Purge Filters) • Replacement every six (6) months is recommended for both Kits Tubes should be wiped clean between scope exchange, and disinfected weekly, or at the hospital’s discretion. www.logiquip.com... -
Page 6: Cleaning The Cabinet
USER GUIDE ENDOSCOPE DRYING CABINETS HEPA FILTER CLEANING THE CABINET Glass cleaner can be used on the glass part of the doors. The stainless steel is easily cleaned by many different methods. While some contaminants may be easily removed, others may require specific cleaners for effective removal. It may be necessary to identify the contaminant or experiment with various cleaners. -
Page 7: Grain Direction
Even the finest cleaning powders can scratch or burnish a finish. On polished finishes, rubbing or wiping should be done in the direction, NOT across, of the polish line or grain of the surface. GRAIN DIRECTION FOR BEST PRACTICES WIPE SIDE TO SIDE www.logiquip.com... -
Page 8: Cleaning The Cabinet Filter
USER GUIDE ENDOSCOPE DRYING CABINETS HEPA FILTER CLEANING THE CABINET FILTER 1. Shut off the cabinet Power Supply 2. If equipped with a side component cabinet, use the provided 8mm Allen wrench to remove the mechanical compartment front panel. For cabinets with components mounted in the top, remove the access or top panel (depending on model) 3. - Page 9 External Filter Filter Reset Button - Resets Timer For Side Cabinet Removal (Side Mount Cabinet) Channel Purge Filter Replacement Cabinet Filter Alert LED Channel Purge HEPA Filter Channel Purge Filter Alert LED Channel Purge Power Button Air Pump www.logiquip.com...
-
Page 10: Troubleshooting
TROUBLESHOOTING Below is a list of common problem and troubleshooting solutions. For items you can not resolve contact your local LogiQuip Representative or Customer Support person. Please have the serial number of the unit available. It can be found on a label inside near the top, or on the top of the unit. -
Page 11: Warranty Information
USER GUIDE WARRANTY INFORMATION LogiQuip products are covered by a Limited 5-Year Warranty from date of receipt against defect in materials or workmanship under normal use and service, excluding Electronic Components, Cart Covers, Custom Products, and LogiCell Tambour Doors. During this period, LogiQuip will, in its sole discretion, repair defects in materials or workmanship that existed when the product was received LogiQuip.com/Warranty...