The Control Panel - Canon IR2020 Easy Operation Manual

The Control Panel

The control panel consists of the LCD, physical keys for copying and faxing, numeric keys, additional functions key,
and indicators. The following is an explanation of the keys used in this manual. For more information, see Chapter 1,
"Before You Start Using This Machine," in the Reference Guide. This Illustrations uses control panel attached to the
optional Super G3 FAX Board-T1.
[COPY] Key
Press to use the Copy functions.
[FAX] Key
Press to use the Fax functions.
[ Coded Dial] Key
Press to perform Coded Speed
Dialing.
[ Address Book] Key
Press to search by name for fax/
phone numbers pre-registered with
One-Touch Speed Dialing Keys or
Coded Speed Dialing Keys.
[Redial/Pause] Key
Inserts a pause when entering a
phone number. Press to redial the
last dialed number when fax is
standing by.
[Hook] Key
Press when you want to dial without
lifting the handset.
[R] Key
Press to dial an outside line access
number or an extension number
when the unit is connected through
a switchboard (PBX).
[ Delayed TX] Key
Press to set Delayed TX.
[ Direct TX] Key
Press to set Direct TX.
[ Stamp] Key
Press to set Stamp.
5
FAX
Coded Dial Address Book Redial/Pause
R Delayed TX Direct TX
01 02 03
05 06 07
09 10 11
13 14 15
17 18 19
21~40 41~60
[One-Touch Speed Dial] Keys
Press to use One-Touch Speed
Dialing (Pre-registered frequently
used numbers).
, Key
Press to decrease or increase the value
for various settings. Also press to view the
previous or next item in the menu.
[OK] Key
Press to accept a set function or mode.
[Paper Select] Key
Press to select paper (Paper drawer
1-4, Stack bypass).
COPY
Hook
Stamp
04
08
12
16
20
[Copy Ratio] Key
Press to enlarge or reduce copy ratio.
[ Two-Sided] Key
Press to set two-sided copying or faxing.
[Two-Page Separation] Key
Press to set two-page separation.
O