METHVEN SATINJET ECO 92973 Installation Manual

Warranty Information
Proof of purchase will be required.
The guarantee does not cover faults or damage caused by
incorrect installation and/or maintenance, ordinary wear and
tear, water composition, etc.
*Please see www.methven.com for full terms and conditions of warranty
Cleaning
Your product has a high-quality finish and should be treated with
care to preserve the visible surfaces.
Never use abrasives or abrasive cleaning agents to clean this
product. Clean regularly with contamination free warm water and
a damp soft cloth.
Lime deposits can be prevented from forming on the faceplate by
wiping immediately after use. If shower performance is
compromised by the build-up of lime-scale, soak in limescale
remover for up to 10 minutes. Do not attempt to remove
limescale with sharp objects or abrasives. Do not use products
containing chlorine bleach or hydrochloric acid as these can
damage the shower. Always rinse the shower thoroughly after
cleaning to remove cleaning products that can damage the
shower.
Clean face plate using a brush with soft bristles.
Do not use any sharp objects to clean nozzles.
Clean filter washer located in the hose cone on the water outlet
end periodically.
We have a policy of continuous improvement and reserve the right
to change specifications without notice.
METHVEN UK LIMITED
METHVEN EXPERIENCE CENTRE
3/3A STONE CROSS COURT
YEW TREE WAY
TEL: 0800 195 1602
GOLBORNE
FAX: 0844 406 8690
WARRINGTON
EMAIL: sales@uk.methven.com
WA3 3JD
www.methven.com
UNITED KINGDOM
INST-ECO01 15/05/2023
SATINJET ECO SHOWER HEAD
Installation Guide
Technical Specification
Operating Pressure
Min: 1.0 bar
5 bar
Max:
Operating Temperature
60°C
Hot:
5°C
Cold:
Inlet Connections:
½" BSP
Features:
• Water efficient without
compromising performance
• Satinjet® technology - twin jets of
water collide into thousands of tiny
droplets to deliver voluminous
shower coverage