Advertisement
When attaching the drawer
runner to the unit:
Insert DRAWER SPACER SLEEVE into
the gable in your desired position then
line up the DRAWER SPACER with the
holes on the runner and use the 20mm
C/S SCREW to fasten the runner to the
SLEEVE attached to the gable.
Repeat for both sides
***If positioning drawers above or below
each other allow 6 guide holes above or
below the drawer runner for the second
drawer***
YOUR UNIT IS NOW COMPLETE
In the interest of our environment
Please dispose of all packaging thoughtfully.
Screw from the second
(2nd) hole in next to the
wheel on the runner
Advertisement
