Toro TIMECUTTER 74685 Service Manual page 74

Pod Installation
Chassis: Service and Repairs
1. Place the RH pod into position on the machine.
2. Install the control panel. Hand tighten with the screw securing the control
panel to the RH pod.
g301692
3. Install the smart speed knob to the smart speed lever. Hand tighten with the
screw securing the smart speed knob to the smart speed lever.
g301691
4. Place the LH pod into position on the machine.
5. Move the motion control from the neutral position to the neutral lock position.
6. Install the fuel cap on the LH side pod.
7. Install the 3 screws (per pod) securing the pod to the pod support brackets.
Torque screws to 11 N • m (100 in-lb).
8. Flip the seat back into position.
Figure 71
Figure 72
Page 5–24 TIMECUTTER® Service Manual
3433-938 Rev A