Toro TIMECUTTER 74685 Service Manual page 123

Motion Control Actuator Installation (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301718
20. Install the 2 (T-27) screws to the front of the seat pan. Torque screw to 11
N • m (100 in-lb).
g301717
21. Flip the seat forward.
22. Install the seat switch connection and flip the seat into the operator's position.
23. Raise the deck until tension is added to the lift handle. Remove the wood
blocks (2x4 inches) under each side of the deck.
Figure 165
Figure 166
Page 5–73 Chassis: Service and Repairs