Toro TIMECUTTER 74685 Service Manual page 103

Steering Control Box Removal (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301896
26. Remove the 7/16 inch nut securing the motion control rod to the motion
control actuator. Remove the motion control rod.
g301897
27. Remove the 4 (T–30) screws (4 per control box) securing the steering control
box to the chassis. Remove the steering control box and seat rod from the
machine.
Note: When removing the RH steering control box, remove the T-30 screw
securing the height-of-cut bracket to the chassis.
Figure 126
Figure 127
Page 5–53 Chassis: Service and Repairs