Toro TIMECUTTER 74685 Service Manual page 130

Smart Speed Assembly Installation (continued)
Chassis: Service and Repairs
g309652
4. Install the top T-30 screw and 7/16 inch nut securing the damper to the
chassis and motion control actuator. Torque screw and nut to 11 N • m (100
in-lb).
5. Install the 2 (9/16 inch) bolts per motion control arm. Torque bolts to
40.5–44.5 N • m (30–33 ft-lb).
6. Install the cubbie by lifting the front of each pod to maneuver the cubbie
onto the chassis.
7. Move the smart speed selector to the trim/turtle position.
8. Install the 2 screws (T-20) securing the cubbie to the chassis. Torque screws
to 11 N • m (100 in-lb).
Figure 178
Page 5–80 TIMECUTTER® Service Manual
3433-938 Rev A