PTO Switch Installation (continued)
PTO Switch Testing
TIMECUTTER® Service Manual
3433-938 Rev A
g302097
2. Connect the PTO switch.
3. Install and hand tighten the Philips head screw to the control panel.
g302095
4. Connect the battery by installing the positive battery cable first, then the
negative cable to the battery.
1. Remove the control panel from the right console.
2. Disconnect the PTO switch from the wire harness.
3. With the switch in the ON position (button pulled OUT).
Figure 285
Figure 286
Page 8–15
Electrical System: Service and Repairs