Table of Contents
Advertisement
Configuring SSM
To configure the SSM function, set the FSO parameters listed below to appropriate
values using the Drive composer pro PC tool. See parameter group
page 435.
You can use the SSM function either with a safety encoder or with a safe speed
estimate. For more information on the SSM function, see page 182. If you use an
encoder, you must configure the encoder interface first (see section
safety encoder interface
Note: Depending on the application, set the negative and positive SSM limits
separately.
on page 313).
Configuration 387
SSMx
on
Configuring the
Advertisement
Table of Contents
