Auto Adjustment And Quick Auto Adjustment - Ricoh Pro C5300S Operating Instructions Manual

7. Troubleshooting

Auto Adjustment and Quick Auto Adjustment

You can automatically correct the front and back misalignment by scanning adjustment sheets on the
exposure glass.
The procedure is the same for both Auto Adjustment and Quick Auto Adjustment.
Auto Adjustment consumes 3 adjustment sheets for precise adjustment.
Quick Auto Adjustment consumes 1 adjustment sheet for simple adjustment.
For scanning on the exposure glass, the background sheet is required in addition to the adjustment
sheet. To print the background sheet, select A3 or 11 × 17 paper for a tray paper setting.
Requirements for Aligning Front and Back Image Positions
• Custom paper with a paper type and thickness that supports duplex printing is allocated to the
paper tray.
• The paper size is within the following range:
• Vertical length: 182.0-330.2 mm (7.17–13.00 inches)
• Horizontal length: 182.0-487.7 mm (7.17–19.20 inches)
1. Press [Tray Paper Settings] on the Home screen.
2. Press [Registration to Align Front and Back Images].
3. Press [Print Background Sheet].
4. Select the paper tray with the A3 or 11 × 17 paper tray setting, and then press [Print].
The background sheet is printed.
The background sheet can be used repeatedly.
5. Select the paper tray with the custom paper to align the front and back.
6. Press [Auto Adjustment] for precise adjustment and [Quick Auto Adjustment] for simple
adjustment.
In Auto Adjustment, 9 sheets (3 blank sheets, 3 adjustment sheets with images printed on both sides
and 3 blank sheets) are printed.
In Quick Auto Adjustment, 3 sheets (1 blank sheet, 1 adjustment sheet with images printed on both
sides and 1 blank sheet) are printed.
7. Follow the displayed instruction to load the back ground sheet and adjustment sheet on
top of it, and then press [Start Scanning].
Scan with the ADF closed.
Repeat this until scanning is completed.
112