Advertisement
9. Attach the Mitered Roof Top Edge Trim (17") and the (2) 3
3/8" Mitered Roof Top Edge Trim (1 left & 1 right) to the top
edges of the Front & Rear SideWalls.
11. Attach a Corner to the rear edge, a 17" Mitered Roof Top Edge Trim to
the top edge, and a 15 3/4" Flat Trim to the upper edge of the Back Wall (be-
tween the Corners).
10. Attach the (2) Notched Corners to the inside edges (1 left & 1 right), at-
tach (2) Corners to the outside edges and attach the (2) 2 1/4" Flat Trim to the
upper edges of the Front & Rear Side Walls between the Corners.
Corner bottom notch
fits over entry ramp
Page 4
12. Attach the remaining (2) Corners to the Front Walls.
13. Attach the Front Step below the Front Door.
14. Attach the Coat Rack to the inside of the Back Wall approx.
6" above the floor.
Congratulations! You're project is complete.
Advertisement
