ASSEMBLY & OPERATIONS MANUAL
ASSEMBLY:
20 minutes
STEP 7: Position the spreader upright on wheels.
Place handles inside of the rest as shown in the
outlined box below and pull upward to mate the
handle in place with the rest.
Attach the upper handle to the frame rest installed
in Step 6 using four (7.1) 1/4" x 1 ½" hex bolts and
four 1/4" nuts (7.2). See closeup Figure 7.3
Upper handle to frame rest - Figure 7.3
4 x
7.1
4 x
7.2
PAGE 4
P80000_M52098_Rev_June2020