Step 1 Preparing the power
supply
Charging the battery pack
Use the battery pack after charging it for your
camcorder.
Your camcorder operates only with the
"InfoLITHIUM" battery pack (M series).
See page 149 for details of the "InfoLITHIUM"
battery pack.
(1) Open the DC IN jack cover and connect the
AC power adaptor supplied with your
camcorder to the DC IN jack with the plug's v
mark facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to the wall socket.
(4) Set the POWER switch to OFF (CHG).
Charging begins. The remaining battery time
is indicated in minutes on the display
window.
4
POWER
2,3
The number in the illustration of the display
window may differ from that on your camcorder.
(1)
(2)
(3)
(4)
FULL
v
1
15