Inserting a scene from a VCR
– Insert Editing
To change the insert end point
Press ZERO SET MEMORY on the Remote
commander again after step 5 to erase the ZERO
SET MEMORY indicator and begin from step 3.
Note
The picture and sound recorded on the section
between the insert start and end points will be
erased when you insert the new scene.
When the inserted picture is played back
The picture may be distorted at the end of the
inserted section. This is not a malfunction.
To insert a scene without setting the insert
end point
Skip step 3 and 4. Press x when you want to stop
inserting.
x
108