Sony DCR-TRV140E Operating Instructions Manual page 89

Dubbing a tape
Using the i.LINK cable (DV connecting
cable)
Simply connect the i.LINK cable (DV connecting
cable) (optional) to DV IN/OUT and to DV IN
of the DV products. With digital-to-digital
connection, video and audio signals are
transmitted in digital form for high-quality
editing. You cannot dub the screen indicators.
(1)Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2)Set the input selector on the VCR to DV IN if
it is available.
Refer to the operating instructions of your
VCR for more information.
(3)Set the POWER switch to VCR.
(4) Play back the recorded tape on your
camcorder.
(5)Start recording on the VCR.
Refer to the operating instructions of your
VCR for more information.
DV IN/OUT
: Signal flow/
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
(1)
(2)
(3)
(4)
(5)
i.LINK cable
(DV connecting cable)
(optional)/
DV S VIDEO
DV IN
x
89