Quickly Locating A Scene Using The Zero Set Memory Function - Sony DCR-TRV140E Operating Instructions Manual

Quickly locating a
scene using the zero
set memory function
Your camcorder goes forwards or backwards to
automatically stop at a desired scene having a
counter value of "0:00:00".
Use the Remote Commander for this operation.
Use this function, for example, to view a desired
scene later on during playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY on the Remote
Commander at the point you want to locate
later. The counter shows "0:00:00" and the
ZERO SET MEMORY indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter's
zero point. The tape stops automatically when
the counter reaches approximately zero. The
ZERO SET MEMORY indicator disappears
and the time code appears.
(5) Press N. Playback starts from the counter's
zero point.
ZERO SET MEMORY
(1)
(2)
(3)
(4)
(5)
DISPLAY
x
m
N
DISPLAY
81