Setting up
Installing the water dispenser line (for exterior model)
Parts for water line installation
Water line fixer and screws
Pipe connector
Water line
Purifier lock-clip
Purifier
Connecting to the water supply line
Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler (A) to the tap.
CAUTION
The water line must be connected to the cold water pipe. If it is connected to the hot water
pipe, it may cause the purifier to malfunction.
WARRANTY INFORMATION
This water line installation is not covered by the refrigerator or ice maker manufacturer's
warranty. Follow these instructions carefully to minimise the risk of expensive water
damage.
NOTE
If the coupler does not fit on the current tap, go the nearest authorized service dealer and
purchase the right couplers fittings.
34 English
DA68-03176S-01.indb 34
2015. 5. 16.
9:10