Electrolux SC320 User Manual page 11

Problem
The appliance is
noisy
The appliance does
not operate. The
lamp does not oper-
ate.
The lamp does not
work.
The compressor
operates continual-
ly.
The compressor
does not start im-
mediately after
pressing the COOL-
MATIC switch, or
after changing the
temperature.
Water flows on the
rear plate of the re-
frigerator.
Water flows into the
refrigerator.
Possible cause
The appliance is not sup-
ported properly
The appliance is switched
off.
The mains plug is not con-
nected to the mains socket
correctly.
The appliance has no
power. There is no voltage
in the mains socket.
The lamp is in stand-by.
The lamp is defective.
The temperature is not set
correctly.
The door is not closed cor-
rectly.
The door has been opened
too frequently.
The product temperature
is too high.
The room temperature is
too high.
This is normal, no error has
occurred.
During the automatic de-
frosting process, frost de-
frosts on the rear plate.
The water outlet is clog-
ged.
ENGLISH
Solution
Check if the appliance
stands stable (all the four
feet should be on the floor)
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electri-
cal appliance to the mains
socket.
Contact a qualified electri-
cian.
Close and open the door.
Refer to "Replacing the
lamp".
Set a higher temperature.
Refer to "Closing the door".
Do not keep the door open
longer than necessary.
Let the product temperature
decrease to room tempera-
ture before storage.
Decrease the room temper-
ature.
The compressor starts after
a period of time.
This is correct.
Clean the water outlet.
11