7.3.2
Recommended Lubricants
Your machine can operate at top efficiency only
if clean lubricants are used.
•
Use
clean
containers
lubricants.
•
Store in an area protected from dust,
moisture, and other contaminants.
LUBRICANT
SPEC
SAE Multi-
Purpose
Grease
NLGI 00
Traxon SAE
80W90
Gear
SAE 75W90
Lubricant
API Service
Class GL-5.
(SAE J2360
Preferred)
Single Grade
Hydraulic
Trans-
Oil
Hydraulic Oil *
* For Australian Units – Use SAE 15W40 complying with SAE specs for API Class SJ and CH-4 engine oil.
** The following oil company and equipment manufacturer brand names are recommended:
Petro Canada Duratran
John Deere Quatrol® J20C
** The following oil company and equipment manufacturer brand names are acceptable:
New Holland Hydraul
Shell Donax TD
Form # 169053
MAINTENANCE/SERVICE
to
handle
all
DESCRIPTION
High Temp. Extreme Pressure (EP2)
Performance With 1% Max Molybdenum
Disulphide (NLGI Grade 2).
Lithium Base
High Temp. Extreme Pressure (EP)
Performance With 10% Max Molybdenum
Disulphide (NLGI Grade 2).
Lithium Base
Synthetic EP
High Thermal & Oxidation Stability.
API Service Class GL-5
Fully Synthetic Gear Lubricant
** See Below For List of Recommended
Brand Names.
Case IH Hy-Tran Plus®
Agco Power Fluid 821XL
Esso/Exxon Hydraul 56
Do not overfill the cutterbar when
adding lubricant.
failure of cutterbar components may occur
if overfilled.
USE
As Required
Unless
Otherwise
Specified.
Driveline
Slip-Joints
Conditioner
Drive
Gearbox
Cutterbar
Pump Drive
Gearbox
Bevel
Gearbox
Hydraulic
Drive
Systems
55
IMPORTANT
Overheating and
CAPACITIES
13 Ft
16 Ft
--
--
Lubricated For Life
16 oz. (454 grams)
7 pints
9 pints
(3.25 liters)
(4.25 liters)
2.1 qts (2.0 liters)
0.86 pints US (0.4 liters)
39 gal. US
48 gal. US
(147 liters)
(180 liters)
Model Year - 2010