MacDon A30-D Unloading And Assembly Instructions page 6

•
Use only service and repair parts made
or approved
manufacturer. Substituted parts may not
meet strength,
requirements.
•
Do NOT
Unauthorized modifications may impair
the function and/or safety and affect
machine life.
•
Stop engine, and remove key from
ignition before leaving operator's seat for
any reason. A child or even a pet could
engage an idling machine.
•
Keep the area
machinery clean and dry. Wet or oily
floors are slippery. Wet spots can be
dangerous when working with electrical
equipment. Be sure all electrical outlets
and tools are properly grounded.
•
Use adequate light for the job at hand.
•
Keep machinery clean. Do NOT allow oil
or grease to accumulate on service
platforms, ladders or controls. Clean
machines before storage.
•
Never use gasoline, naphtha or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
•
When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.
169001
by the equipment
design, or safety
modify the machine.
used for servicing
SAFETY
4 Revision F