Verifying Your Connected Power Sensor; Figure 1-9 Keysight Connection Expert With A List Of Instrument I/O On The Pc; Figure 1-10 Keysight Interactive Io Dialog Box - Keysight Technologies U2000 Series Operating And Service Manual

1 Getting Started

Verifying Your Connected Power Sensor

1 To verify your connected power sensor, go to Start > All Programs >
2 Your connected power sensor will be detected and shown on the

Figure 1-9 Keysight Connection Expert with a list of instrument I/O on the PC

3 Select the U2000 USB sensor on the list of USB device connected to the

Figure 1-10 Keysight Interactive IO dialog box

16
Keysight IO Libraries Suite > Keysight Connection Expert to launch Keysight
Connection Expert.
Instrument I/O on this PC panel as shown in the following figure.
PC and right- click. A context menu will appear and select Send Command
To This Instrument and the Keysight Interactive IO dialog box will appear
as shown below.
U2000 Series Operating and Service Guide