Hyundai Accent GL 2002 Manual page 89

Fig. 80: Identifying Connecting Rod Notches
Courtesy of HYUNDAI MOTOR CO.
DISASSEMBLY AND REASSEMBLY OF THE PISTON PIN
1. Using the special tools (09234-33001) and (09234-33002), disassemble and reassemble the piston and
connecting rod.
Fig. 81: Identifying Special Tools For Piston & Connecting Rod Disassembly & Reassembly
Courtesy of HYUNDAI MOTOR CO.
2. The piston pin is press fit into the rod little end, and the piston floats on the pin.
3. The tool consists of a support fixture with fork inserts, guides, adapters, an installer and a remover. The
piston is supported in the support fixture while the pin is being installed or removed. Guides help position
the pin as it is installed or removed, while the rod is supported by fork inserts.
4. To remove the pin from the piston, place the piston in the support fixture with the rod resting on the fork
inserts. Pass the remove tool through the top of the support fixture and use it to press out the pin.
viernes, 19 de febrero de 2021 07:12:58 a. m.
2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Page 89 © 2011 Mitchell Repair Information Company, LLC.