Table of Contents
Advertisement
Fig. 151: Installing Retainer Locks
Courtesy of HYUNDAI MOTOR CO.
NOTE:
When the spring is compressed, Check that the valve stem seal is not
pressed against the bottom of the retainer.
5. Clean both gasket surfaces of the cylinder block and cylinder head.
6. Verify the identification marks on the cylinder head gasket.
7. Install the gasket so that the surface with the identification mark faces toward the cylinder head.
8. Tighten the bolts to the specified torque in the sequence shown.
viernes, 19 de febrero de 2021 07:13:00 a. m.
2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Page 165
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
