Hyundai Accent GL 2002 Manual page 152

Fig. 139: Checking Cylinder Head Flatness
Courtesy of HYUNDAI MOTOR CO.
3. Check the cylinder head surface for flatness in the direction as shown in the illustration. If flatness
exceeds the service limit in any direction, either replace the cylinder head or machine the cylinder head
matching surface lightly.
Flatness of cylinder head gasket surface
Standard: Less than 0.03mm (0.0012 in.)
Limit: 0.2 mm (0.008 in.)
VALVES
1. Using a wire brush, clean the valve thoroughly.
viernes, 19 de febrero de 2021 07:13:00 a. m.
2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Page 152 © 2011 Mitchell Repair Information Company, LLC.